PuROLine PL40T36PP Four Stage RO System

Reverse Osmosis Systems

PuROLine PL40T36PP 4-Stage RO Replacement Filters

This 4 stage RO system uses sediment and carbon block pre-filters to reduce sediment, chlorine and chlorine by-products before the membrane filters out impurities larger than .001 microns. The GAC post filter treats for taste and odor. You can find and order all your filters at once in our replacement kits below.

Replacement Filter Info

Sediment Filter (93023) - Replace every 6-12 months or as needed

Carbon Block Filter (OMB934-5M) – Replace every 6-12 months or as needed

RO Membrane TFC 36 GPD (655007-00) – Replace every 24 months or as needed

Inline Carbon Filter (CL10ROT33-BB) – Replace every 6-12 months or as needed

Helpful Filter Information

Not all filters have the same replacement schedule. Replace the RO membrane filter every two years. Replace all other filters every 6-12 months. Help keep your system sanitary by never using filters longer than 12 months, except the RO membrane filter, regardless of how much water you use.

Filter Replacement Schedule

We’ve taken the guesswork out of replacing your filters. Begin a filter replacement cycle by replacing all filters on your system (Filter Kit "YSM"). The following year, or sooner if recommended by the manufacturer, replace all filters except the RO membrane (Filter Kit "YS"). Repeat this cycle by following the helpful diagram below.

Manuals & Instructions