Carbon Filters

 

What are Carbon Filters?

what-are-carbon-filtersCarbon is a commonly-used medium in water filtration processes. In fact, nearly every type of water filter system--whether it's a backpacking water filter, refrigerator filter, shower filter, pitcher filter, reverse osmosis water filtration system or whole-house filter--utilizes carbon filtration in some way.

Carbon filters for water filtration are produced by grinding up a carbon source. 

This carbon source could be:

    • bituminous coal
    • peat
    • coconut shells 

Of the above-mentioned carbon sources, coconut shells are the most widely used and are highly renewable. 

To create the filter, material is heated in the absence of oxygen to 1000 degrees to bake off impurities. The material is then subjected to 1600-degree steam to “activate” the carbon. The steam leaves carbon granules filled with cracks and pores, enabling them to store large amounts of chemicals and contaminants.

How do Carbon Filters Work?

carbon-block-filter-example-the-omb934-5m

Carbon filters remove contaminants through adsorptionAdsorption means that contaminants are attracted to the surface of the activated carbon and held to it, much the same way a magnet attracts and holds iron filings.

Carbon filters also act as a catalyst to change the chemical composition of some contaminants. Activated carbon is ideal for removing chlorine, organic chemicals such as pesticides, THMs like chloroform, and many VOCs that are components of gasoline, solvents and industrial cleaners. 

What is a Granular Activated Carbon (GAC) Water Filter?

GAC Granular Activated Carbon Water FilterGAC stands for "granular activated carbon" and is made of tiny, loose granules of carbon. GAC filters are usually used as a "polishing filter' in the water filtration process and are highly effective at improving the taste and odor of drinking water.

While a GAC carbon filter is simply loose pieces of carbon, a carbon block filter is where the loose pieces of carbon are compressed together to form a filter.

What do GAC Water Filters Remove?

Granular activated carbon (otherwise known as GAC) filters have extremely high adsorption capabilities and can remove a wide variety of contaminants (see contaminant list here).

GAC filters are often used to remove VOCs, pesticides, nitrates, hydrogen sulfide, and much more.

Municipal water treatment plants use disinfectants such as chlorine and chloramine which can leave an objectional taste and odor in drinking water. GAC filters are able improve taste and odor, and are therefore commonly used as one or two stages in a reverse osmosis system.

What is a Carbon Block Filter?

carbon block filter is where the loose pieces of carbon are compressed together to form a filter.

In a carbon block filter, one pound of compressed activated carbon (the amount in a standard ten-inch filter cartridge) has the equivalent surface area of a 160 acre farm, making it one of the most absorbent materials known to man. 

Because of the compressed nature of a carbon block filter, water flow rates are lower than that of a GAC filter made of loose medium. And flow rates are impacted by the micron rating of the filter. A carbon block filter is rated to a certain micron rating depending on how much the carbon is compressed. The smaller the micron rating, the finer the filtration and the lower the flow rate.

Carbon Block Filters vs. GAC Carbon Filters  

What is the difference between a carbon block filter and a GAC filter? Carbon block filters and GAC filters are made of the same material, but one is made of ground up loose carbon and the other is the loose carbon that has been compressed.

Many water filter systems use both carbon block AND GAC filters in the water filtration process. 

Carbon block filters are made of a solid block of compressed carbon and are often used as a pre-filter in reverse osmosis and other water filtration systems. Carbon block water filters are extremely effective in filtering out a variety of contaminants including very small contaminants or particle size. Water will generally flow slower during this filtration stage due to the compact nature of the compressed carbon.

The granular activated carbon or GAC water filter is made of loose carbon granules. Water flows more freely through this stage, so flow rates are higher for GAC filters than carbon block filters. GAC filters also have very high adsorption properties and can remove contaminants including chlorine, hydrogen sulfide, lead and much more.

 
 inside a carbon filter
Filter GAC (Granular Activated Carbon) Carbon Block
Medium Type Loose carbon granules Compressed carbon
Filtration Purpose Prefilter & Polishing filter Prefilter
Typical Use
To improve taste and odor of water by removing chlorine, hydrogen sulfide (rotten egg odor), etc See complete list here.
Can filter sediment, as well as pesticides, heavy metals, and other contaminants
General Flow Rates Generally higher flow rates Generally lower flow rates
How Often to Replace Every 6-12 months* Every 6-12 months*
Advantages May do a better job at adsorbing certain contaminants Can adsorb AND filter

* Filter replacement schedule will vary based upon local water conditions and household usage 

Carbon Block Filters are Rated in Microns

Carbon block filters are rated by the size of contaminants that can be removed at the micron level. Generally, the range is from 50 microns down to .5 microns. The higher the rating, the larger the contaminant size. Very small contaminants will need to be filtered with a small micron size rated filter, such as .5 micron rating. 

micron filter size for understanding water filter micron rating

 

How Often Should Carbon Water Filters Be Changed?

For carbon filters used in reverse osmosis drinking water systems, both the carbon filter and the polishing filter (granular activated carbon filter) should be replaced every 6-12 months. Ultimately, the lifespan of a carbon filter can vary based on how dirty or contaminated the water is. Carbon quality, humidity and usage can also factor into how long a carbon filter can last. 

-ro-filter-replacement-schedulev2

Are Carbon Filters Safe?

Yes. In fact, many of the carbon filters we carry have been tested and rated by a third party for material safety. 

Do Charcoal Water Filters Work?

Charcoal is a type of carbon that was used in the past, but rarely used now. Typically all carbon filters are now made from coconut. Usually when someone refers to "charcoal filters", they actually mean carbon filters, and carbon filters are extremely effective in removing contaminants from water.

What are Coconut Water Filters?

Coconut water filters are made of coconut husk carbon that has been vacuum heated in a lab and cleaned. Coconut is the most common type of carbon used in water filters today as they are effective at removing bad tastes, odors, VOCs, chlorine, pesticides, and more.

What are Catalytic Carbon Filters?

Catalytic carbon filters are a type of carbon filter that contains a special catalytic carbon block. Catalytic carbon filters are highly effective at chlorine and chloramine reduction. One example of a catalytic carbon filter is the Matrikx ChloraGuard water filter.

What Do Carbon Filters Remove From Water?

Carbon filters can effectively remove or reduce many contaminants from water including VOCs, chlorine, lead, fluoride, pesticides and much more. For a more comprehensive list, read What Do Carbon Filters Remove.