|
Model
Rayne Clear & Rayne Clear Plus Reverse Osmosis System
|
|
| |
Please
Note: Standard Rayne/Microline systems
use standard Microline filters which are available below.
Newer Rayne/Microline systems use pre and
post filters designated with "RC".
Such as S7028-RC. If your system
requires the "RC" filters, the
standard Rayne/Microline Filters we offer will not fit.
Please look at the owners manual
that you received with your system. If your manual
shows the part numbers S7011, S7028 & S7025 without
the "RC", the filters listed below will fit your
system. |
Part Number |
Description |
Price |
|
S7011R |
5 Micron Sediment Pre-Filter |
3.50 |
|
S7025R |
Granular Activated Carbon
Post Filter |
9.50 |
|
S7028R |
Sediment/Carbon Block Pre-Filter |
10.50 |
|
S7206R |
2" x 6" Inline
Carbon Post Filter 1/4" FPT |
8.00 |
|
S7206-QC |
2" x 6" Inline
Carbon Post Filter 1/4" QC |
9.50 |
|
S1224RSR |
14 Gallon Per Day CTA Membrane |
60.00 |
|
S1227RSR |
25 Gallon Per Day TFC Membrane |
59.00 |
|
S1229RSR |
35 Gallon Per Day TFC Membrane |
65.00 |
|
| |
|
|
|
| |
|
|
|
| |
Please Note: The Q -60
Series filters are proprietary due to a difference in the
thread pattern, and are available for purchase only through
a select group of Rayne Water dealers. Because they
are proprietary they are more expensive than standard Q-series
filters.
ESP offers a less expensive option by suggesting that you
replace your Rayne valve head assembly with a standard valve
head assembly. This costs less than a single Rayne
filter replacement, is simple to do and in no way
alters the performance of the system. It just changes the
system to allow you to use the standard Q-series filters
in the future.
To convert your Q-60 series system to a standard Q series
unit (so that standard Q series system filters and membrane
can be used) simply purchase one of our standard valve head
assemblies. There is no need to replace your existing RO
faucet, cold water feed line valve, drain clamp or RO storage
tank. The substitution is easy. It is a matter of
disconnecting three lines from your Rayne Q-60 valve head
assembly and reconnecting the three lines to the new standard
valve head assembly. Quick connect fittings are used
on both the Q-60 and the standard Q series assemblies so
it is a very simple process.
See diagram at bottom of page
|
Part # |
Description |
Price |
|
PT2000_Head |
Two Stage Q Series Valve Head Assembly
- For Converting Two Stage Rayne Reverse Osmosis System to
a Standard Q-Series RO System |
54.00 |
|
| PT3000_Head |
Three Stage Q Series Valve Head Assembly - For
Converting Three Stage Reverse Osmosis System to a Standard
Q-Series RO System |
68.50 |
|
PT4000_Head |
Four Stage Q Series Valve Head Assembly - For
Converting Four Stage Reverse Osmosis System to a Standard
Q-Series RO System |
78.50 |
|
Q5605-RY |
5 Micron Polypropylene Sediment Pre-Filter |
15.30 |
|
Q5633-RY |
Granular Activated Carbon Pre/Post Filter |
15.85 |
|
Q5621-RY |
10 Micron Carbon Block Pre/Post Filter |
22.43 |
|
Q5640-RY |
Granular Coconut Shell Activated Carbon Post
Filter |
16.85 |
|
TQ56-36FC-RY |
36 Gallon Per Day Q Series TFC Membrane With
Flow Control & Check Valve |
68.00 |
|
TQ56-50FC-RY |
50 Gallon Per Day Q Series TFC Membrane With
Flow Control & Check Valve |
74.00 |
|
|
|
|
|
